Switch Cisco Nexus N9K-C93180YC-FX3 là thiết bị chuyển mạch dạng 1 Rack-Unit (1RU) với độ trễ dưới 1 μs , cung cấp băng thông lên đến 3,6 Terabit/giây (Tbps) và xử lý hơn 1,2 tỷ gói tin mỗi giây (bpps), đáp ứng hiệu suất cao cho các trung tâm dữ liệu hiện đại. N9K C93180YC-FX3 được trang bị 48 port downlink có thể cấu hình để hoạt ở các tốc độ 1/10/25-Gbps, giúp tối ưu hóa triển khai theo nhu cầu thực tế. Bên cạnh đó là sáu port uplink hỗ trợ tối đa tốc độ 40 Gbps hoặc 100Gbps, mang đến các tùy chọn di chuyển linh hoạt. Thiết bị chuyển mạch Cisco Nexus 93180YC-FX3 hỗ trợ các cấu hình viễn thông PTP tiêu chuẩn với chức năng SyncE và PTP boundary clock cho môi trường biên trung tâm dữ liệu viễn thông.
Thông số kỹ thuật N9K-C93180YC-FX3
| Specifications | |
| Ports | 48 x 1/10/25-Gbps and 6 x 40/100-Gbps QSFP28 ports |
| Downlink supported speeds | 1/10/25-Gbps Ethernet |
| CPU | 6 cores |
| System memory | Upto 32 GB |
| SSD drive | 128 GB |
| System buffer | 40 MB |
| Management ports | 1 RJ-45 port |
| USB ports | 1 |
| 1PPS | GPS 1PPS input or output |
| Hardware Performance and Scalability Specifications | |
| Maximum number of Longest Prefix Match (LPM) routes | 1,792,000 |
| Maximum number of IP host entries | 1,792,000 |
| Maximum number of MAC address entries | 512,000 |
| Maximum number of multicast routes | 128,000 |
| Number of Interior Gateway Management Protocol (IGMP) snooping groups | Shipping: 8,000
Maximum: 32,000 |
| Maximum number of Cisco Nexus 2000 Series Fabric Extenders per switch | 16 |
| Maximum number of Access Control List (ACL) entries |
Single-slice forwarding engine:
5000 ingress 2000 egress |
| Maximum number of VLANs | 4096 |
| Number of Virtual Routing and Forwarding (VRF) instances |
Shipping: 1,000
Maximum: 16,000
|
| Maximum number of ECMP paths | 64 |
| Maximum number of port channels | 512 |
| Maximum number of links in a port channel | 32 |
| Number of active SPAN sessions | 4 |
| Maximum number of VLAN’s in Rapid per-VLAN Spanning Tree (RPVST) instances | 3,967 |
| Maximum number of Hot-Standby Router Protocol (HSRP) groups | 490 |
| Number of Network Address Translation (NAT) entries | 1,023 |
| Maximum number of Multiple Spanning Tree (MST) instances | 64 |
| Flow-table size used for Cisco Tetration Analytics platform | 64,000 |
| Number of Queues | 8 |
| Power | |
| Power supplies (up to 2) | 650W AC, 930W DC, or 1200W HVAC/HVDC |
| Typical power (AC/DC) | 325W |
| Maximum power (AC/DC) | 600W |
| Input voltage (AC) | 100 to 240V |
| Input voltage (High-Voltage AC [HVAC]) | 200 to 277V |
| Input voltage (DC) | –48 to –60V |
| Input voltage (High-Voltage DC [HVDC]) | –240 to –380V |
| Frequency (AC) | 50 to 60 Hz |
| Fans | 4 |
| Airflow | Port-side intake and exhaus |
| Acoustics | Port Side Exhaust: Fan speed at 50%:63.4 dBA Fan speed at 70%:74.3 dBA Fan speed at 100%: 83.4 dBA Port Side Intake: Fan speed at 50%:64.6 dBA Fan speed at 70%:76.1 dBA Fan speed at 100%: 85.4 dBA |
| Physical dimensions & Weight | |
| Physical dimensions (H x W x D) | 1.72 x 17.3 x 19.6 in (4.4 x 43.9 x 49.6 cm) |
| Cisco Nexus 93180YC-FX3 without power supplies or fans | 21 lb (9.52 kg) |
| 650W AC power supply | 2.42 lb (1.1 kg) |
| 930W DC power supply | 2.42 lb (1.1 kg) |
| 1200W HVDC/HVAC power supply | 2.42 lb (1.1 kg) |
| Fan tray: NXA-FAN-35CFM-PE or NXA-FAN-35CFM-PI | 0.26 lb (0.12 kg) |
| Environmental properties | |
| Operating temperature | 32 to 104°F (0 to 40°C) |
| Nonoperating (storage) temperature | –40 to 158°F (–40 to 70°C) |
| Humidity | 5 to 95% (noncondensing) |
| Altitude | 0 to 13,123 ft (0 to 4000m) |
| RoHS compliance | Yes |
| MTBF | 288,760 Hours |
| Minimum ACI image | ACI-N9KDK9-15.1.3 |
| Minimum NX-OS image | NXOS-10.1.1/NXOS-9.3.7 |
















Đánh giá
There are no reviews yet